Pharaoh Revival Necklace
Product information
$124.00
+
Description
Inspired by Armatures of Bridge Structures and Danish + Normandy Half Timbering
made and designed by me in my studio in Tx
★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658
All other items in my shop require production time before shipment.
Featured on design-milk.com
http://design-milk.com/egypt-inspired-jewelry-by-jamie-spinello/
Handmade from copper wire that has been rolled, cut, configured, soldered, and blackened.
Production requirements for me to produce this piece is apx 2 weeks.
Geometric Necklace designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric+necklace
more GEOMETRIC designs:
http://www.etsy.com/shop/jamiespinello/search?search_query=geometric
I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs!
http://www.jamiespinello.etsy.com
All of my designs are under copyright protection © Jamie Spinello 2012
Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Iron Maiden Cage Cuff
$165.00
Copper Cuff Bracelet - The Automaton Warrior - Cage Bracelet - warrior cuff ~MADE TO ORDER~ unisex ♀ ♂ available in either high polish copper or sanded black ★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. Sizing: S 5"-7", M 6"-8", L 7"- 9" (measurements based on circumference of wrist) second measurement needed for circumference of forearm as well.....please list during checkout Length: from wrist to mid arm in photo is apx 4.5-4.75" long ( I can make shorter or longer ones upon discussion, but discuss first before ordering/pricing for longer ones may increase) Also available in shiny copper: http://www.etsy.com/listing/90083327/automaton-copper-cuff-bracelet-cage I designed it with both architectural armatures and automatons in mind. After seeing the movie Hugo and seeing the wonderful automaton (robot) figure, I felt compelled to make something in response to it. This is a very thick soldered copper cuff (14g flattened copper wire) constructed with a torch, then blackened and sanded to a very medieval looking finish before being sealed. ►Each is made to match my prototype and is one of a kind and unique (please specify size) Note ~ cuff tapers to fit arm, it is smaller in the front and gets wider as it goes up the arm ►More CAGE / AUTOMATON designs in my shop http://www.etsy.com/shop/jamiespinello/search?search_query=cage ►This design is 100% made by me in my Tx studio from copper © Jamie Spinello 2012 Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Geometric Slice Earrings
$40.00
Geometric Earrings - Copper - Black Finish - Slice Design - handmade in Austin, Tx 100% handmade by me in my studio (made to order-each pair is one of a kind) ★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I make everything in my studio from copper wire and copper sheet. These earrings are made from flattened copper wire that I cut, composed, and soldered into place. The black finish is chemically induced and sealed with a lacquer for resilience. Size: Apx sz: .75"w x 3.25"L - I can make larger or smaller ones for you if you like - add to notes Finishes: available in blackened or high polish shiny copper, please specify which you want I love curved corners, concentric triangles and using angles to create interesting structures. Lately I have been interested in seeing where combining 45 degree and 90 degree angles can take me. These have an art deco feel to them, which I have been drawn towards for the last couple of years as I look at blue prints of bridges, buildings and airplanes for inspiration. In addition to the art deco movement, the design of these earrings specifically emerged from my recent fascination with embellished exterior slatting on tudor style houses. ex: decorative half timbering All of my designs are under copyright protection © Jamie Spinello 2012 Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Pharaoh Revival Earrings
$70.00
Geometric Earrings - Pharaoh Design - Black Finish - Art Deco and Prairie school revival 100% handmade by me in my studio upon order (made to order-each pair is one of a kind) ★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658 All other items in my shop require production time before shipment. If faster shipment is needed, please discuss with me before ordering. *Recently featured on design-milk.com !!!* I make everything in my studio from copper wire and copper sheet. These earrings are made from flattened copper wire that I cut, composed, and soldered into place. The black finish is chemically induced and sealed with a lacquer for resilience. Size: Apx sz: 2"w x 3.5"L - I can make larger or smaller ones for you if you like Finishes: available in blackened or high polish shiny copper, please specify which you want I love curved corners, concentric triangles and using angles to create interesting structures. Lately I have been interested in seeing where combining 45 degree and 90 degree angles can take me. These have an art deco feel to them, which I have been drawn towards for the last couple of years as I look at blue prints of bridges, buildings and airplanes for inspiration. In addition to the art deco movement, the design of these earrings specifically emerged from my recent fascination with embellished exterior slatting on tudor style houses. ex: decorative half timbering GEOMETRIC collection: http://www.etsy.com/shop/jamiespinello/search?search_query=geometric checkout other my other earring designs here: http://www.etsy.com/shop/jamiespinello?section_id=6228346 ►►►Please allow 14 days for production All of my designs are under copyright. © Jamie Spinello 2012 Registered with the US Copyright Office > duplications of this design will be prosecuted http://www.jamiespinello.etsy.com
Pharaoh Revival Necklace
$124.00
Copper Geometric Necklace - Pharaoh Revival Design Inspired by Armatures of Bridge Structures and Danish + Normandy Half Timbering made and designed by me in my studio in Tx ★NOTE★This item is MADE TO ORDER and requires 2-3 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658 All other items in my shop require production time before shipment. Featured on design-milk.com http://design-milk.com/egypt-inspired-jewelry-by-jamie-spinello/ Handmade from copper wire that has been rolled, cut, configured, soldered, and blackened. Production requirements for me to produce this piece is apx 2 weeks. Geometric Necklace designs: http://www.etsy.com/shop/jamiespinello/search?search_query=geometric+necklace more GEOMETRIC designs: http://www.etsy.com/shop/jamiespinello/search?search_query=geometric I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs! http://www.jamiespinello.etsy.com All of my designs are under copyright protection © Jamie Spinello 2012 Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Armature Cuff Ring
$45.00
Copper Ring - Armature Cuff Ring - Blackened - ADJUSTABLE *made to order *Please allow 2 weeks for production unless otherwise discussed. All sizes are adjustable. Please select your size from drop down menu. If you don't see your size, and would like to purchase, please contact me via the "request a custom order" link above. Unisex 100% made by me in my studio in TX ~ each piece is unique and made to order This design is part of a series of works I have been creating. See more here: More CAGE / AUTOMATON designs in my shop http://www.etsy.com/shop/jamiespinello/search?search_query=cage This handmade ring is made from copper that is formed, soldered, hammered and blackened. The ring is sealed with lacquer. check out my other statement rings: https://www.etsy.com/shop/JamieSpinello?section_id=17665295 my shop: http://www.jamiespinello.etsy.com
Geometric Drop Earrings - Sterling Silver
$60.00
Geometric Drop Earrings - Sterling Silver - Handmade - Structure and Line Design - Art Deco Revisted 100% handmade by me in my studio! ★NOTE★This item is MADE TO ORDER and requires apx 2 weeks for production by hand in my studio. Please keep this in mind when ordering. I do have a variety of "Ready to Ship" items to choose from that you can see here: http://www.etsy.com/shop/jamiespinello?section_id=14624658 All other items in my shop require production time before shipment. If faster shipment is needed, please discuss with me before ordering. apx measurement: 2.5" long x a little under 1.5" at its widest point Each pair is handmade by me based on my prototype design (pictured) upon purchase. Each pair is freshly made and has never been worn. My other GEOMETRIC designs: http://www.etsy.com/shop/jamiespinello/search?search_query=geometric checkout other my other earring designs here: http://www.etsy.com/shop/jamiespinello?section_id=6228346 ►►►Please allow 14 business days for production unless otherwise discussed with me http://www.jamiespinello.etsy.com All of my designs are under copyright protection © Jamie Spinello 2012 Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Automaton Ring cuff
$45.00
Automaton Cuff Ring - Blackened Copper - Made in Austin, Tx - Jamie Spinello ADJUSTABLE *made to order - please allow up to 3 weeks for production Handmade in my Austin,Tx Studio Choose size from drop down Every piece is an original, based on the prototype pictured. Each is made one at a time by hand, no two are alike. I make sure that each one is exquisite and structurally complex like the one pictured. check out my other statement rings: https://www.etsy.com/shop/JamieSpinello?section_id=17665295 I make bracelets, cuffs, earrings and rings too! Don't forget to check out my other designs! http://www.jamiespinello.etsy.com
Half Automaton Cuff
$110.00
Geometric Jewelry - Half Automaton Copper Cuff - Art Deco Revival - Solid Copper - Blackened ★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. ~MADE TO ORDER~ unisex ♀ ♂ sizing: S 5"-6", M 6"-7", L 7"-8" (measurements based on circumference of wrist) Each is made to match my prototype and is one of a kind and unique (please specify size) I designed it with both architectural armatures and automatons in mind. This is my latest design and one of my most striking. This is a very thick soldered copper cuff (14g flattened copper wired) constructed with a torch. This design is 100% made by me in my Tx studio from reclaimed copper. ~Also available in Blackened copper~ specify at checkout please. ►►►Please allow apx 16 business days for production unless discussed or in stock. I make each by hand in my studio from scratch and need time for production if I don't have your size already made. my shop: http://www.jamiespinello.etsy.com All of my designs are under copyright protection © Jamie Spinello Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.
Maiden Cuff
$110.00
Maiden Cuff - Blackened Copper ★NOTE★This item is MADE TO ORDER and requires 2 weeks for production by hand in my studio. Please keep this in mind when ordering. ~MADE TO ORDER~ unisex ♀ ♂ sizing: S 5"-6", M 6"-7", L 7"-8" (measurements based on circumference of wrist) All sizes are adjustable. Each is made to match my prototype and is one of a kind and unique (please specify size) I designed it with both architectural armatures and automatons in mind. This is my latest design and one of my most striking. This is a very thick soldered copper cuff (14g flattened copper wired) constructed with a torch. ►►►Please allow apx 16 business days for production unless discussed or in stock. I make each by hand in my studio from scratch and need time for production if I don't have your size already made. my shop: http://www.jamiespinello.com All of my designs are under copyright protection © Jamie Spinello Registered with the US Copyright Office > If you see an unauthorized site selling my work please let me know.